Milissa,
If your unit is working properly with Keysoft 7.0 presently, you don't need
that E-boot file. It is necessary if you are upgrading to Keysoft 7.0 from
let's say Keysoft 6.1.1 or Keysoft 6.2. You would then follow the Keysoft
7.0 upgrade instructions to get your unit to Keysoft 7.0. Once your unit is
upgraded to Keysoft 7.0, or it already has Keysoft 7.0 working properly, you
only need the NK.BIN file which has the Keysoft 7.01 patch. Be sure to
place or download this patch to a properly prepared or formatted SD card.
This is done by running the "prepare SD Card for upgrade" program which is
located in the Keysoft System disk in the windows folder. Press U for
utilities menu, space till you hear run application program, press enter,
when asked for which program, go to the Keysoft System disk and windows
folder and run the above program to prepare your SD card for upgrade. If
you already have a card which has been properly prepared or formatted, then
go to the next step. Copy or download the NK.bin file which is the 7.01
patch. That is the only file you will need on your SD card provided 7.0 is
working properly in your machine. Rename or delete any old NK.bin files you
might have on the SD card you use. Once the SD card is inserted, be certain
your M-power is plugged into an outlet. Press reset with dots 4 6 on a BT
Keyboard. You will hear ascending tones. Press dots 1 and 2 by themselves
and you will hear a few more tones, then silence! Then do another reset
holding down dots 4 5 while doing that reset. You will hear more tones and
you will see messages on your Braille display if you have one. If all of
these things happen, your upgrade is well on its way. Just wait a few
minutes till your unit resets or reboots again and you should hear the
Keysoft 7.01 message. You are then good to go. I have a BT unit so my
instructions work with a BT unit.
Jim Aldrich
----- Original Message -----
From: "Milissa Garside" <[EMAIL PROTECTED]>
To: "Braillenote List" <[email protected]>
Sent: Saturday, July 15, 2006 3:45 PM
Subject: [Braillenote] Need Help With 7.01 Upgrade
Hello Listers,
I am following the Keysoft 7.0 upgrade instructions for the 7.01 upgrade.
However, I am not able to find the file "eboot.bin". I have cut and pasted
the instructions on how to obtain this file. However, the link is not on
the website as the instructions say. Where would I go to get this file?
4. From the same website http://www.humanware.com/7_0. Click on the link
called
"Keysoft 7.0 Boot Loader mPower". And save this to the SD card or your PC
(the
file is called eboot.bin).
Any help would be greatly appreciated.
Thanks.
Milissa
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
