Hello, Jose and list:
For those of you that may be bored with this long message, I
won't be hurt if you delete it. However, Jose, because you have
had your share of problems with your machine, I want to make it
as clear as I can. I am concerned about your data misalignment
message.
1. From the Main Menu, press I for the internet. Write in
humanware.com/Resources/KeySoft7.2Upgrade.asp. When you see your
Humanware information come up, press the letter P three times.
When you see "Product Key, Press Enter. You will see "Log in".
Press dots 46 chord. You will see "serial number". Enter the
serial number in lower case. Press dots 46 chord again, and your
password will be frog1. Press dots 46 chord again, and you will
see "Log in button". Press Enter. Press dots 56 chord six times
until you see, "downloads available". Press dots 46 chord to see
7.2. Press dots 46 chord once more to see "download button".
Press Enter. You will see "download Package. Press the Space
bar once. You will see "download in to which folder"? Press
Backspace until you see "drive list". You will press S. for the
SD card. Press Enter. At the "filename" prompt, press Enter.
After a few beeps, you will see download is complete.
2. To install your Product Key, go to Main Menu. Press U, then
press A. At the "run application from which drive" prompt, press
Backspace to get to the "drive list". Go to the SD card, and
press Enter. You will see "directory name". Just press Enter.
Press space to see your Product Key, and press Enter. Follow the
prompts, pressing Enter at the Command Line. You should get
"installation of the Product Key was successful" message.
,Your SD card can be anywhere from 64 to 512 M. In my
experience, 128 does better. If you have not prepared your SD
card, you will want to do that before downloading the upgrade.
3. From the Main Menu, press U. Press A. At the "run program
from which drive" prompt, press K for Keysoft. If that is not
the offered drive, press Backspace to get to the drive list. You
will see "directory name"? I generally press T chord so that I
can see the folder mode, though some people don't. Go down to
the Windows folder, and press Enter. Press Space once to get to
the "list of files" prompt. Press the letter P twice, so that
you see "prepare SD card. Press Enter. You will receive the
warning that any information on your card will be lost, and you
will be asked if you are sure you want to proceed. Press Y.
Follow the prompts. You will be returned back to the Utilities
Menu.
4. From Main Menu, press I to go back to the internet. Go back
to the humanware.com/Resources/KeySoft7.2Upgrade.asp site. Press
Enter. Press dots 56 chord until you see 7.2 download. Press
Enter. You will be asked which drive, folder and file you want
to download in. Make sure you are at the SD card drive. I
generally download my product key and upgrade in the "none"
folder. If you are using dial up, this will take a long time to
download.
5. Once you have downloaded the upgrade, make sure your unit is
plugged in. Make sure you have no other cards in your slots.
Press a reset with dots 45. You should hear tones. Do not
disturb the unit in any way while it is downloading.
Good luck, and enjoy your upgrade.
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
