Hello, Ann:
If what I gave you doesn't work, you may want to try these steps:
1) From the Main Menu, press U for the Utilities Menu, then A
for "Application Program".
2) At the "Run program from which drive?" prompt, press F to
select the Flash Disk.
3) At the "Run program from which directory?" prompt, it's
easiest to press
SPACE with T to get into "Folder List" mode. Once in "Folder
List" mode, type "manual" (without the quotes). Alternatively,
you can hit SPACE
once to get into a list of folders on the Flash Disk, press M to
get to the folders starting with that letter, and move down the
list until you land on
"manual". Either way, once you've typed it in or navigated to
it, press ENTER to accept.
4) At the "Program Name?" prompt, SPACE through the list until
you reach bnb dot exe, and press ENTER to accept.
5) Leave the "Command Line?" prompt blank, and follow all
subsequent prompts.
6) Once installation of that file is complete, repeat steps
1-5. However, in step 4, choose "Usbnb dot exe" (without the
quotes) instead of simply bnb dot exe (the second file's there to
determine which version of the Scientific Calculator chapter
(chapter 8) you will have (in your case, you have the one which
lists symbols and numbers in terms of Nemeth, used in the U.S.)).
7) Again, while running the second file, leave the "Command
Line?" field blank,
and follow all subsequent prompts.
Once you're back up and running, check to see if your User
Guide is there. It should be since these executables install the
manual. Also, hit BACKSPACE with
ENTER with H for the User Guide, and press I for the Index,
followed by V for
"Version". Make sure the version reflects your model
(BrailleNote BT) and
KeySoft version (v5.1).
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
