Hi, Here, the real way of figuring out is power status item from Options Menu. Try disconnecting or reconnecting the adapter fron both ends - BN side and from wall outlet side. Or could it be that the middle joint might have been disconnected. Also, try a warm reset (press the reset button) while the adapter is connected to the mPowerCheers, Joseph (sent from my phone)
-----Original Message----- From: Linda Adams <[email protected]> Sent: Thursday, December 09, 2010 3:29 PM To: [email protected] Subject: [Braillenote] BrailleNote Not Recognizing the AC Adapter Hi, everyone. I have been charging my BrailleNote mPower 7.2 without problems until yesterday. Then the unit didn't turn on and show the message "AC Adapter on" as it usually does when I plug it in, and the unit isn't getting warm. When I check all the information on the battery status, the messages don't indicate that the battery needs to be reconditioned or recalibrated. I have had a notetaker for 15 years, and whenever its battery was worn out, it simply wouldn't hold a charge for more than an hour, but this BrailleNote simply isn't recognizing that it has an adapted plugged into it. The adapter is getting a little warm, so power is getting to it. Any thoughts? Thank you for your help. Linda Adams ___ Replies to this message will go directly to the sender. If your reply would be useful to the list, please send a copy to the list as well. To leave the BrailleNote list, send a blank message to [email protected] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ Replies to this message will go directly to the sender. If your reply would be useful to the list, please send a copy to the list as well. To leave the BrailleNote list, send a blank message to [email protected] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
