My Braille note has no difficulty whatsoever powering up with the Micro Drive plugged in.
W. Nick Dotson On Sat, 20 Dec 2003 07:41:41 -0800, robert stigile wrote: >Hello, >You need to take the Microdrive out before you turn on the braille note. >The unit cannot power up properly with the microdrive in so give that a try. >Robert Stigile >----- Original Message ----- >From: "donna slater" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Saturday, December 20, 2003 12:47 AM >Subject: [Braillenote] Braillenote keeps re-setting >> >> >> ---- Original Message ------ >> Subject: Braillenote keeps re-setting >> >> Hi >> >> I would be grateful for any help anyone might be able to give as I can't >work out what's going on at all. >> >> Sometimes, after my Braillenote has been switched off for a while (this >has ranged from as little as 30 minutes to as much as 24 hours) it does a >complete reset for no readily apparent reason. I switch the Braillenote on >and it just beeps and resets itself. Even the clock has to be reset and my >spelling dictionary is always lost, which means I have to re-install it. >> >> I am running the latest version of Keysoft, and have a compact flash card >in the back slot of the Braillenote and a microdrive in the side slot. >> >> If anyone can give me any suggestions as to what might be going on here I >would be very grateful. >> >> Thanks in advance for any help >> >> Best wishes >> >> Donna Slater >> >> >> ___ >> To leave the BrailleNote list, send a blank message to >> [EMAIL PROTECTED] >> To view the list archives or change your preferences, visit >> http://list.pulsedata.com/mailman/listinfo/braillenote >> >> >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.pulsedata.com/mailman/listinfo/braillenote W. Nick Dotson Support Technician for Kurzweil 1000
