We tried a reset. Even if I set the paper weight to plastic the dots are still lighter on the left side of the page.
Josh > ----- Original Message ----- >From: Susan Stageberg <[EMAIL PROTECTED] >To: Braillenote List <[EMAIL PROTECTED] >Date: Mon, 16 Feb 2004 09:56:48 -0600 >Subject: RE: [Braillenote] braille blazer and braille note problems >The problem with the dots being lighter on the left is within the >Blazer; try resetting the Blazer. To do this, hold down the three menu >keys while powering up; the Blazer will ay "okay to reset?" then press >those three buttons again. That should fix the dot problem. The rest of >your settings sound right; usually when you get a blank page between >pages and it brailles over the perforation, the page length needs >adjusting, but the settings you mentioned are the ones I use. >Susie Stageberg >Project ASSIST with Windows >Iowa Department for the Blind >(515) 281-1351 >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Josh >Kennedy >Sent: Saturday, February 14, 2004 2:04 PM >To: [EMAIL PROTECTED] >Subject: [Braillenote] braille blazer and braille note problems >Hi, >I have a braille note with the new motherboard, keysoft5 with Duxbury >translator. I'm having a problem embossing. First of all when the >braille blazer embosses the dots are light on the left side of the page >and get heavier as they go over. Second, after each page the braille >blazer skips a page. It also is printing on the perferations. How should >I have the forward translation options set? I tried changing some of >them with no effect. Here are my braille blazer settings. Actually it's >my friend's braille blazer, not mine. My braille note settings are: page >length 25, page width 33 page offset 2 wordrap on. page numbering on >with numbers brailled at top right. Also, do I have to translate the >.txt file to a .brl or .brf file before telling it to emboss page >numbers? or can the emboss option automatically add page numbers to the >.txt file? Can a .doc file be translated into grade two braille and >brailled? Ok, now here are the blazer's settings: port parallel, paper >feed push-out, left margin zero, right margin 34, top margin 0 and >bottom is zero also. Page length is zero. paper length 11, auto linefeed >off braille six dot, label mode off. Graphics mode is turned off. I'm >trying to print a 210 page satellite television channel listing for my >friend so he can reference it when he needs to. Also, the top cap to the >button on the blazer came off and it looks like the cap is about to fall >apart. Is the braille blazer the cheapest braille embosser that he can >get? >Thanks for your help >Josh >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.pulsedata.com/mailman/listinfo/braillenote >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.pulsedata.com/mailman/listinfo/braillenote
