The DLL files should work fine with the newer board. I've never had a BN with a classic board, and the files have always worked with mine. Perhaps your DLL files may be corrupted. Call or email Pulse Data and ask them to email you the files. You should have the Spanish and German files because they would install with the program when you use the program on the Compact Flash card that came with each language. However, you might want to ask for just thekgm32.dll file, and when it gets sent to you as an attachment, you can detach it to the Windows folder on the Flash Disk and then reset your BN. You can also ask for the German and Spanish DLL files again, and do a reset after detaching all three to the Windows folder on the Flash Disk. The languages should then speak properly when you switched to them in the BN. HTH. Maria
>----- Original Message ----- >From: Josh Kennedy <[EMAIL PROTECTED] >To: Braillenote List <[EMAIL PROTECTED] >Date: Sun, 15 Feb 2004 23:35:34 -0500 (EST) >Subject: re: [Braillenote] BrailleNote's Multilingual Program and the ScannaR >The software did not seem to work so I went through and erased every file and >folder or directory on the flash disk and did a re-install of keysoft5. I did >not re-install the keysoft multilingual spanish and german software. Keep in >mind that maybe these dll files are not designed to work on the newer >motherboard? >Josh >> ----- Original Message ----- >>From: Maria Kristic <[EMAIL PROTECTED] >>To: Braillenote List <[EMAIL PROTECTED] >>Date: Sun, 15 Feb 2004 17:58:44 -0800 >>Subject: re: [Braillenote] BrailleNote's Multilingual Program and the ScannaR >>Do you have both DLL files anywhere in your system at all. If you do, and if >>you've copied both DLL files into your Windows folder on the Flash Disk, it >>won't take effect until you do a reset. If the files are in the folder, go >>to the Main Menu to make sure everything's saved. Then, press the Reset >>button, but don't hold down any keys. After the BN resets itself, you should >>get the message "System files have been updated. Press reset." Reset again >>with no keys held down, and you will be returned to the Main Menu. Try >>seeing if the unit speaks in that language. When you open a document, you >>have to press ENTER with L (that's the BT command and I don't know the QT, >>but you can go to the Options Menu and select the "Language for Keyboard >>Entry" option). Whichever way you do it, the BN will say "Language?" >>followed most likely by English. To get to the other language, you cycle >>through the list using the BT command of SPACE with dots 3-4 (if you have a >>QT you can issue > t >> he command for Help and it will tell you the command for cycling through the >> languages). After the language you want is displayed, press ENTER. Now you >> can start typing in that language, and the BrailleNote should speak >> properly. HTH. >>Maria >>> ----- Original Message ----- >>>From: Josh Kennedy <[EMAIL PROTECTED] >>>To: Braillenote List <[EMAIL PROTECTED] >>>Date: Sun, 15 Feb 2004 20:17:16 -0500 (EST) >>>Subject: re: [Braillenote] BrailleNote's Multilingual Program and the ScannaR >>>They keynote synthesizer will not change languages when I switch to spanish >>>for example. it won't read it in that language, it's like keysoft5 doesn't >>>recognise those dll files. >>>Josh >>>> ----- Original Message ----- >>>>From: Maria Kristic <[EMAIL PROTECTED] >>>>To: Braillenote List <[EMAIL PROTECTED] >>>>Date: Sun, 15 Feb 2004 14:09:38 -0800 >>>>Subject: re: [Braillenote] BrailleNote's Multilingual Program and the >>>>ScannaR >>>>Hi Josh, >>>>What exactly do not mean by saying it doesn't work? Are you able to install >>>>it? If you can, what is it not able to do? If you could clarify your >>>>problem somehow, I might be able to help you. Thanks. >>>>Maria >>>>> ----- Original Message ----- >>>>>From: Josh Kennedy <[EMAIL PROTECTED] >>>>>To: Braillenote List <[EMAIL PROTECTED] >>>>>Date: Sun, 15 Feb 2004 16:59:20 -0500 (EST) >>>>>Subject: re: [Braillenote] BrailleNote's Multilingual Program and the >>>>>ScannaR >>>>>I actually got my multilingual software last year. I had keysoft three >>>>>with the classic motherboard. Now that I upgraded, this software no >>>>>longer works. >>>>>or no longer seems to work. >>>>>Josh >>>>>> ----- Original Message ----- >>>>>>From: Maria Kristic <[EMAIL PROTECTED] >>>>>>To: Braillenote List <[EMAIL PROTECTED] >>>>>>Date: Sun, 15 Feb 2004 11:39:24 -0800 >>>>>>Subject: re: [Braillenote] BrailleNote's Multilingual Program and the >>>>>>ScannaR >>>>>>I have KeySoft version 5. When I purchased my BrailleNote, I had version >>>>>>4.01, and since I'd ordered my Spanish software at the time of purchase, >>>>>>it was already installed for me; however, I had the Compact Flash card >>>>>>that contained the software on it. When I downloaded the KeySoft 5 >>>>>>upgrade from the Internet, the multilingual worked fine. When I sent my >>>>>>BN for repair, KeySoft 5 had been burnt into ROM, and all my files had >>>>>>been lost; this meant my multilingual program was no longer installed, >>>>>>but I was able to install it myself through the Application Program >>>>>>option in the Utilities Menu. However, it wouldn't work at first because >>>>>>I didn't have a file called kgm32.dll for whatever reason. Check to see >>>>>>if you have this file in the root directory of your Flash Disk or in your >>>>>>Windows folder also on the Flash. You have to go into Directory from the >>>>>>File Manager, and, after selecting the Flash Disk, you can just put in a >>>>>>slash at the "Directory Name" prompt. Go into t > h >> e >>>> v>>>i>>>>ew of "All, Including Hidden, Files" and see if the file's there; >>>> if it is, copy (or move) it to the Windows folder on the Flash Disk and >>>> press reset after doing so. Also check the Windows directory on the Flash >>>> Disk by putt in /windows at the prompt for directory after selecting the >>>> Flash Disk; again, you'll have to check the view of hidden files. If you >>>> don't have a windows folder (I didn't have one when the unit came back >>>> with KeySoft 5.0 Build 25 burnt into ROM), you can create one to copy the >>>> file to. As far as I understand, this is the speech driver for English, >>>> and, for example, the speech driver for Spanish would be called >>>> kgm32spn.dllbe you have to make sure that both these files are in the >>>> Windows folder on the Flash Disk, and the foreign language speech driver >>>> would be installed in the root directory of the Flash Disk after you >>>> installed multilingual software. The foreign language speech file would >>>> probably be there because it's one of the files in >> the mult>il>>>>>ingual package, but if you don't have the regular speech >> driver (as I didn't), you'll have to call or email Technical Support so you >> could somehow obtain it. Once both speech files (regular and foreign >> language) are in the Windows folder on the Flash and you've done a Reset >> with no keys held down, your text in another language should be read fine. >> I think the first multilingual release came out with KeySoft 4, so it >> probably wouldn't work with a version 3. With me, I had the Spanish >> dictionary along with all the other files in the multilingual program, and >> the only problem was the speech. If you have any other problems, try >> re-installing your software, and look in such places as the Dictionaries and >> Windows folders on the Flash to see if there's anything in there related to >> your language; in my case, the file I needed was called "spanish >> install.exe" (without the quotes). Hope this helps. >>>>>>Maria >>>>>>> ----- Original Message ----- >>>>>>>From: Josh Kennedy <[EMAIL PROTECTED] >>>>>>>To: Braillenote List <[EMAIL PROTECTED] >>>>>>>Date: Sun, 15 Feb 2004 13:18:06 -0500 (EST) >>>>>>>Subject: re: [Braillenote] BrailleNote's Multilingual Program and the >>>>>>>ScannaR >>>>>>>Do you have keysoft version three? The multilingual that I have will not >>>>>>>work with my version five of keysoft. >>>>>>>Josh >>>>>>>> ----- Original Message ----- >>>>>>>>From: Maria Kristic <[EMAIL PROTECTED] >>>>>>>>To: BrailleNote List <[EMAIL PROTECTED] >>>>>>>>Date: Sun, 15 Feb 2004 09:36:03 -0800 >>>>>>>>Subject: [Braillenote] BrailleNote's Multilingual Program and the >>>>>>>>ScannaR >>>>>>>>Hi Everyone, >>>>>>>>I know this is a little off topic, but I was wondering if the same >>>>>>>>multilingual program for the BrailleNote worked with the ScannaR >>>>>>>>stand-alone scan-and-read system from Pulse Data. If so, is there a >>>>>>>>way for the user to install the program themselves, or would the unit >>>>>>>>have to be sent back. I don't actually have the unit yet, but I'm just >>>>>>>>curious because I already have the Spanish multilingual software on the >>>>>>>>BN, and I would need Spanish software to scan in Spanish books for >>>>>>>>school in addition to the English language being on the unit. Also, >>>>>>>>can more than one language be installed on the ScannaR, so the user can >>>>>>>>switch between them as needed, like in the BN? Any responses anyone can >>>>>>>>offer are much appreciated. Thanks. >>>>>>>>Regards, >>>>>>>>Maria >>>>>>>>___ >>>>>>>>To leave the BrailleNote list, send a blank message to >>>>>>>>[EMAIL PROTECTED] >>>>>>>>To view the list archives or change your preferences, visit >>>>>>>>http://list.pulsedata.com/mailman/listinfo/braillenote >>>>>>>___ >>>>>>>To leave the BrailleNote list, send a blank message to >>>>>>>[EMAIL PROTECTED] >>>>>>>To view the list archives or change your preferences, visit >>>>>>>http://list.pulsedata.com/mailman/listinfo/braillenote >>>>>>___ >>>>>>To leave the BrailleNote list, send a blank message to >>>>>>[EMAIL PROTECTED] >>>>>>To view the list archives or change your preferences, visit >>>>>>http://list.pulsedata.com/mailman/listinfo/braillenote >>>>>___ >>>>>To leave the BrailleNote list, send a blank message to >>>>>[EMAIL PROTECTED] >>>>>To view the list archives or change your preferences, visit >>>>>http://list.pulsedata.com/mailman/listinfo/braillenote >>>>___ >>>>To leave the BrailleNote list, send a blank message to >>>>[EMAIL PROTECTED] >>>>To view the list archives or change your preferences, visit >>>>http://list.pulsedata.com/mailman/listinfo/braillenote >>>___ >>>To leave the BrailleNote list, send a blank message to >>>[EMAIL PROTECTED] >>>To view the list archives or change your preferences, visit >>>http://list.pulsedata.com/mailman/listinfo/braillenote >>___ >>To leave the BrailleNote list, send a blank message to >>[EMAIL PROTECTED] >>To view the list archives or change your preferences, visit >>http://list.pulsedata.com/mailman/listinfo/braillenote >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.pulsedata.com/mailman/listinfo/braillenote
