Hello Leslie, Yes, you need to enter a code on the BrailleNote, then enter the same code on the PC. You do this after you have selected the service you wish to use. After the code has been entered at both ends, you should be able to use the Bluetooth device you have paired with immediately.
Regards, Dean Jackson Customer/Technical Analyst Humanware DDI: +64 3 373 6184 Fax: +64-3-384 4933 Email: [EMAIL PROTECTED] Internet: www.humanware.com Skype: pulsedata-support-nz__________________________ ----- Original Message ----- From: "Leslie P Peterson" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, April 15, 2005 12:50 PM Subject: [Braillenote] Auth. Code? > I do not understand what the User's Guide says.... > 12.11.3 > 5. Review the list with SPACE and select the device with which you want > to pair by pressing ENTER when it is displayed. Single service devices > such as a keyboard, will offer pairing when selected and you can start > using them straight away, although in many cases you will be asked to > type in an authentication code. This code is the same on both sides, and > you will need to enter it twice. The BrailleNote PK will cue you through > this process. Pairing with a PC to use ActiveSync is slightly different > so refer to 12.13.7 ActiveSync using Bluetooth. > > Is it mean that I make my own create code on both PK and PC? Like this > PK for PK and PK for PC. And Gateway for PK and Gateway for PC? > > NOTE: I was looking around the software and manual but not find the > codes. I must be misunderstand. > > Leslie-- > > Mr. Leslie Peterson > email: [EMAIL PROTECTED] > www.deafblindinfo.org > list: [EMAIL PROTECTED] > http://www.deafvision.net/mdba > > ___ > To leave the BrailleNote list, send a blank message to > [EMAIL PROTECTED] > To view the list archives or change your preferences, visit > http://list.pulsedata.com/mailman/listinfo/braillenote >
