Will; How could you do something like that when the BN is not is wide as a piece of paper. You would not have the same effect as you would if you Brailled it out. What if the Title was longer than line 1 of the BN, how could you tactually feal it centered. It might put the first half on the far right of line and the second half on the far left of line. Would you still call this centering? Not me.
Terry Powers -----Original Message----- From: will [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 10, 2005 8:51 AM To: Braillenote List Subject: Re: [Braillenote] reading and editing documents josh i mean can i see the line centred on the braille display not printed on an embosser sorry should have been clearer will ----- Original Message ----- From: "Josh Kennedy" <[EMAIL PROTECTED]> To: "Braillenote List" <[email protected]> Sent: Tuesday, May 10, 2005 2:32 PM Subject: re: [Braillenote] reading and editing documents > Yes, do the following. Go into keyword and act as if you're going to print > a file, go to the setup printer prompt, at the printer port? Prompt. press > control space until you hear file. Then down arrow until you hear printer > type? This should be set to standard. Then press escape and y to confirm > changes and make sure your margins are set to 66 lines per page... One > inch is 6 lines down and one inch is 10 characters across width wise. > Print letters I imagine are taller than they are wide. Now print your file > and you will hear printing complete or something like that in either case > you'll be back at the keyword menu. Now go to file translate and export, > choose to export from the keysoft system disk from the none folder and > you're looking for a file called print to file.txt. Export this as a file > and save it where you want to and in whatever filetype you want. You can > do the same when you emboss a braille file. You can emboss to a braille > file and do the print to file that way as well. > > Josh > > >> ----- Original Message ----- >>From: will <[EMAIL PROTECTED] >>To: Braillenote List <[email protected] >>Date: Tue, 10 May 2005 10:10:22 +0100 >>Subject: [Braillenote] reading and editing documents > >>hi > >>i have a document that i am typing in keyword >>instead of seeing the centre command on the display can i actually see the >>line centred? >>so can i read and edit the document,and see my results, not just the >>commands for them? >>after centring i asusme it goes back to left justified? >>will >>___ >>To leave the BrailleNote list, send a blank message to >>[EMAIL PROTECTED] >>To view the list archives or change your preferences, visit >>http://list.pulsedata.com/mailman/listinfo/braillenote > > > ___ > To leave the BrailleNote list, send a blank message to > [EMAIL PROTECTED] > To view the list archives or change your preferences, visit > http://list.pulsedata.com/mailman/listinfo/braillenote > > > ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.pulsedata.com/mailman/listinfo/braillenote
