Hi Jim, Where do you live? Here in MA we're supposed to get snow for the
hundredth time and the temps are something like 10 degrees below normal.
Want to trade places?
Rosemary
----- Original Message -----
From: "James Aldrich" <[EMAIL PROTECTED]>
To: "Braillenote List" <[email protected]>
Sent: Friday, March 11, 2005 3:12 PM
Subject: RE: [Braillenote] Help, help!
I managed to get the product key! Everything is in order and may perform
the upgrade after going outside to enjoy the beautiful day, perhaps close
to 70s.
Do take care all!
Jim
At 10:32 AM 03/11/2005 , you wrote:
Hello List,
Apparently, there is no text on the product key link we can use with our
screen readers. A friend of mine found what I needed and will bring over
a floppy disk and I'll take that file over to the compact flash card, then
upgrade I hope! What can I say?
Jim
At 08:34 AM 03/11/2005 , you wrote:
If you have paid for the upgrade and SMA you should then contact
Pulsedata/Humanware to make them aware that you are unable to download
the
product key for installing 6.1.
Without that small file, you cannot upgrade.
The file is small enough to fit on a floppy but you can also download it
to
your Braille Note if you have an Internet connection to download to your
Braille Note. Then you would copy the key file to your compact flash card
and then follow the instructions for installing keysoft 6.1
Hope this helps.
****************************************
Aloha:
Milton M. Ota
Associate Dealer, Hawaii
Island Computer Access Now ICAN
1318 Kanewai Street
Honolulu, Hawaii 96816-1718
E-mail: [EMAIL PROTECTED]
Website: http://home.hawaii.rr.com/mota
Phone: (808) 734-0612
Cell: (808) 295-2528
========================================
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of James
Aldrich
Sent: Friday, March 11, 2005 7:27 AM
To: [email protected]
Subject: [Braillenote] Help, help!
Hello list,
I went to http://www.pulsedata.com/6_1. I found the product key link and
selected it as I was asked to do! I was then asked to log on which I did
with my unit's serial number and frog1. The instructions told me to look
for a product key link with a download below it so I could download the
product key pertaining to my unit. I was shown that I have no SMA's
available to me and that is understandable since I haven't purchased any
SMA. The only downloadable stuff I could see for me to download pertains
to 5.0 or 5.1 but nothing which pertains to 6.1! How do I fix this so I
can get the product key so I can upgrade. I already have the 6.1 upgrade
card in my unit ready and waiting for me to get started! I'd also like
to
know whether the 6.1 product key can fit onto a floppy disk so I can
transfer it to the card as I've been asked to do?
Thanks much!
Jim Aldrich
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.pulsedata.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.pulsedata.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.pulsedata.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.pulsedata.com/mailman/listinfo/braillenote
