Richie,

I didn't install using ActiveSync, and I don't know if this is what you're 
looking for, but it comes from the KeySoft 5.1 Release Notes available from the 
SDW Site.  They were originally for Build 19, but I edited that below, so it 
reads 22.  Also, (nnnnn) are the first five digits of your BrailleNote's Serial 
Number that you used to log on to the SDW site (because each Serial Number has 
a unique software package associated with it).  The direct link to the page 
which contains the link to download the ActiveSync Installer file is
www.pulsedata.com/Products/Notetakers/braillenote_downloads.asp
The link you want to click says "ActiveSync Installer for KeySoft 4.0x" 
(without the quotes).  Even though it's version 5.1, this file should still 
work.

3.7.  Installing from ActiveSync.
3.7.1.  Copy the file "KeySoft 5.1 Build 19 (nnnnnggddexe", and "ActiveSync 
Installsionewddexe" to a common folder on your PC.
3.7.2.  Turn Speech on then Reset with dots 1-2-3 (f-d-so).
3.7.3.  Establish an ActiveSync connection between your BrailleNote and your PC.
3.7.4.  Using Windows Explorer, open the Folder on your PC into which you 
copied the 2 files.  Select the file "ActiveSync Installsionewddexe", and press 
Enter on your PC keyboard.
3.7.5.  You should immediately get the "PDI KeySoft ActiveSync Installer" 
dialog box appearing on your PC.  Press the Down Arrow key on your PC to select 
"KeySoft 5.1 Build 22 (nnnnn)".  Press Enter to start the installation.
3.7.6.  The install program will establish a connection to the BrailleNote and 
transfer the Installation program to the BrailleNote.
3.7.7.  Depending on your screen reader you may get progress messages during 
this transfer.  The transfer should take about 3 minutes and when complete the 
BrailleNote will announce "Welcome to KeySoft 5.1 Build 22 (nnnnn) 
installation, to start the installation press Enter, to cancel press Space with 
E".
3.7.8.  Press the Enter key on the BrailleNote to start the installation.
3.7.9.  The BrailleNote will beep for about 15 to 20 seconds while the upgrade 
is being installed.  At the completion the BrailleNote will announce: "KeySoft 
5.1 Build 22 installation complete, the ActiveSync installation program will 
give the next instruction.  To continue press Enter".
3.7.10.  Press Enter on the BrailleNote.  A dialog box on the PC should then 
advise that the installation is complete, and that, the BrailleNote should be 
restarted by pressing Reset.  Press Enter on the PC to acknowledge this dialog 
box and close the ActiveSync install program.
3.7.11.  Press Reset on the BrailleNote and KeySoft will restart, and you 
should hear that it is running KeySoft CE Version 5.1 build 22.  The exact 
sequence that follows will depend on the ROM image in your machine, and if you 
already have a KeySoft upgrade installed on the Flash Disk.  Don't be perturbed 
if the sequence or timing doesn't follow exactly that outlined below.  It is 
important that you take note of the installation prompts and act on them 
accordingly.
3.7.12.  If you receive the message; "System files need updating.  Press Reset 
with dots 4-5-6", perform the reset as instructed.  For computer style 
keyboards, hold down the j-k-l keys.
3.7.13.  Press Reset again prior to answering any prompts as regards braille 
language etc.
3.7.14.  Set the Time and Date.
3.7.15.  Listen carefully for other Reset requests, and follow the instructions 
given.
3.7.15.  KeySoft 5.1 build 22 should now be installed and running.
3.7.16.  Import any required "old" Planner files into the new Planner system.

HTH.

Maria

>----- Original Message -----
>From: "Richie Cavallaro" <[EMAIL PROTECTED]
>To: "Braillenote List" <[email protected]
>Date: Mon, 21 Jun 2004 16:29:35 -0400
>Subject: [Braillenote] active sync question

>Hi all trying to send key soft 5.1 build 22 to my braille note.  First of
>all i must say that i am not so familiar with active sync.  I have read the
>section in the manual but still don't understand something.  I got my
>braille note connected and i cut and copied he install file from my
>documents folder.  Now where do i go from here?  Do i paste it in to a
>certain folder or what?



>___
>To leave the BrailleNote list, send a blank message to
>[EMAIL PROTECTED]
>To view the list archives or change your preferences, visit
>http://list.pulsedata.com/mailman/listinfo/braillenote

?


Reply via email to