I actually plugged one of the holes with a toothpick. It definitely
increased the velocity of the steam coming out of the other hole. It
also enabled fantastically textured and sweet microfoam! It's a bit
slower than without the toothpick, but at least you can foam with
it...

-David

On Oct 20, 11:19 pm, Ben McCafferty <[EMAIL PROTECTED]> wrote:
> David,
> Search the archives for "tip experiment" and you'll find my testing and
> results on many tips.  My conclusion (which WLL warned me before I purchased
> the two-hole tip) was that the two hole tip is not very good for anything,
> especially not for microfoam.  It does heat a drink really fast, though, if
> that's what you want to do.
> tx,
> bmc
> "Faith will move mountains, but you'd better bring a shovel....."
>
> > From: DonSWG <[EMAIL PROTECTED]>
> > Reply-To: <[email protected]>
> > Date: Mon, 20 Oct 2008 20:26:29 -0700 (PDT)
> > To: Brewtus <[email protected]>
> > Subject: Has anyone had microfoam success with the Brewtus II's two-hole 
> > wand?
>
> > Hi there, first post! I was just wondering if anyone has been able to
> > coax microfoam from the BII no burn two-hole steam tip. I have been
> > practicing for several months now with the soapy water technique
> > (Scott Rao's idea. it really works), and going back to milk every so
> > often to check up. I can make fine foam with the one hole tip, but
> > it's too slow, and the foam is a bit airier. I have used a high volume
> > tip on a Synesso Cyncra before, so I know how to make good foam, but I
> > seem to be unable to accomplish it on this machine :(. If anyone can
> > give me some tips (pardon the pun), it'd be most appreciated.
>
> > -David

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/brewtus?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to