I didn't know WLL had a plumb in kit.  It was promised to be available 
within one year of the beginning sale of B1 , but never was available, as 
there was a lot of interest posted on this forum. Instead, WLL used the time 
to develop newer models of Brewtus.
  I understand the factory uses a valve to be switched between reservoir and 
mains supply, and don't see why a part like that couldn't be used with the 
Brewtus models. Cost per unit , I guess.
  If you are tapping into the boiler tee inside the machine, (the hole where 
your vibe pump tube screws into) that thread should be 1/4 British pipe. One 
simple adapter from 1/4 british pipe to either 1/4 or 3/8 NPT (your choice, 
but a 3/8 feed in would be better.) The way I understand it, you can get 1/8 
british to work woth 1/8 NPT with teflon tape, but not the 1/4 size. It will 
leak.
  You should check with WLL because I have no idea what they supplied you 
with, but it shouldn't need any other adapters for you to get.  - Dennis
----- Original Message ----- 
From: "Bruce Keeler" <[email protected]>
To: <[email protected]>
Sent: Thursday, July 23, 2009 1:18 PM
Subject: Plumbing fittings


>
> Well, I finally made it to the homebrew store to buy citric acid to
> descale my boilers.  It's now time to revisit an issue I had when I
> first bought my BII, which is plumbing.
>
> I ordered my Brewtus with the optional plumbing kit.  When I went to
> hook it up I could find no clue as to what size the fitting was.  After
> several trips to Ace hardware and much headscratching, I finally came up
> with a combination of fittings, couplings and shitloads of teflon tape
> which only leaked a tiny bit.  I'd like to finally do the job right.
>
> So, does anyone know offhand just what size/type of fitting I need to buy?
>
> Thanks,
> Bruce
>
> > 


--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/brewtus?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to