Hi Brewtus detectives.... another mystery. Problem is that the water heater is not heating to the set point of 95....
Trouble shooting clues: Steam boiler working fine: steam pressure good, steam wand good, hot water wand good. Water boiler only heats to about 47 degrees. Set point of red LED temperature controller is set to 95, small indicator indicates "ON" all the time.. Water coming out of brew group is indeed 47 degrees (measured), Brew group itself is about 47 degrees (by touch... ) so it seems like the controller thermometer is accurate and indicating the boiler should heat. Large red light to right of brew group lights when it heats the water, and goes out when it does not: I can hear quiet gurgling during heating, but then light turns off (and gurgling stops) at about 47 degrees. noise is normal, temperature is not. This happened suddenly, not gradually. coffee this AM was fine (95 degrees as programmed), this afternoon, it holds at about 45-47. Suggestions? Thanks in advance. This machine has served us very well for 3 or 4 years now. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
