I had a similar issue last year. I started by cleaning inside the top of the
"E61" head (removing the large chrome nut, and cleaning the stuff inside,
etc.). I then cleaned the OPV. I eventually replaced it (OPV) even though it
was spotless. Neither of these helped. In my case, it came down to diassembly
of the vibe pump and cleaning. I know this is not recommended, but it looked
like a very simple mechanism to me. What I discovered was bits of thread
sealant had come off and were plugging up the small openings at the outlet end
(if my memory is correct). Since then, no problems. Along with the OPV I
ordered a Vibe pump, which eventually came, but I have not replaced it yet.
_________________________________________________________________
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
http://clk.atdmt.com/GBL/go/171222985/direct/01/
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Brewtus" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/brewtus?hl=en
-~----------~----~----~----~------~----~------~--~---
