I have never changed the pressure stat, so it's about 2 1/2 years old. I am due for descaling, but not overdue. tx, bmc On Oct 31, 2009, at 9:40 AM, Barry Luterman wrote:
> Sounds like the P-stat is going . Keep your eye on it. When was the > last time you changed it?Could also be some hard water deposit > clogging a valve. When was the last time you descaled? > > On Sat, Oct 31, 2009 at 6:36 AM, Benjamin McCafferty > <[email protected]> wrote: > > Good morning, happy Halloween! > > Rambled downstairs this morning, and was preparing to pull a shot. My > steam pressure is normally at 1.45 bar. I glanced down as I was about > to purge the steam wand, and pressure was at 2 bar or a little above. > I purged, and it stayed at 1.7 with the boiler light "on". > > After steaming milk, the pressure had dropped down to 1.2 or so (as > normal), and recovered/shut off at 1.45. Since then all is normal. > > Is something about to let go? Do I need to worry about imminent steam > burns, ha ha? > > Thanks all, > bmc > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
