Check archives for the wiring difference using a Jaeger On Sat, Oct 31, 2009 at 7:08 AM, Barry Luterman <[email protected]> wrote:
> If it is the original p-stat that is probably the problem. replace with a > Jaeger p-stat they last much longer. > don't worry about explosion. The pressure release valve will release th > pressure and you will see water on the top of the machine. > > On Sat, Oct 31, 2009 at 7:02 AM, Benjamin McCafferty <[email protected]>wrote: > >> Yeah, I was thinking of full bunker gear for pulling shots. Picture to >> follow... >> bmc >> >> On Oct 31, 2009, at 9:59 AM, Shaun Taylor wrote: >> >> Maybe setup a blast shield? ;-) >> >> >> ------------------------------------------------------------------------------ >> >> Shaun Taylor >> >> http://shaundoreenevankeegan.blogspot.com/ >> >> http://shaunseye.blogspot.com/ >> >> >> *From:* [email protected] [mailto:[email protected]] *On >> Behalf Of *Benjamin McCafferty >> *Sent:* 31 October 2009 10:47 >> *To:* [email protected] >> *Subject:* Re: Steam pressure very high >> >> I have never changed the pressure stat, so it's about 2 1/2 years old. I >> am due for descaling, but not overdue. >> tx, >> bmc >> On Oct 31, 2009, at 9:40 AM, Barry Luterman wrote: >> >> >> Sounds like the P-stat is going . Keep your eye on it. When was the last >> time you changed it?Could also be some hard water deposit clogging a valve. >> When was the last time you descaled? >> On Sat, Oct 31, 2009 at 6:36 AM, Benjamin McCafferty <[email protected]> >> wrote: >> >> >> Good morning, happy Halloween! >> >> Rambled downstairs this morning, and was preparing to pull a shot. My >> steam pressure is normally at 1.45 bar. I glanced down as I was about >> to purge the steam wand, and pressure was at 2 bar or a little above. >> I purged, and it stayed at 1.7 with the boiler light "on". >> >> After steaming milk, the pressure had dropped down to 1.2 or so (as >> normal), and recovered/shut off at 1.45. Since then all is normal. >> >> Is something about to let go? Do I need to worry about imminent steam >> burns, ha ha? >> >> Thanks all, >> bmc >> >> >> >> >> >> >> >> >> >> >> >> >> > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
