Check with vendor. probably not. Cant imagine that part changed. On Sat, Oct 31, 2009 at 7:57 AM, Benjamin McCafferty <[email protected]>wrote:
> OK, some Saturday morning silliness--you can never be too careful. > > http://s258.photobucket.com/albums/hh280/bmacpiper/FF%20Espresso/ > > Makes it damn hard to tell how hot the milk is though! > > > Barry--I have a B2--adapter needed? > > bmc > > On Oct 31, 2009, at 10:19 AM, Shaun Taylor wrote: > > I’ve been doing some macro of espresso recently, like this phenomenal > 1.75oz straight shot in a bodum (5 day old Makwa, FVA, Sanani and a couple > of Ethiopians) which was no doubt the best tasting straight shot I’ve had in > months. > > http://www.flickr.com/photos/staylortravelling/4056282884/ > > The espresso macro led me down the rabbit hole to this water explosion, get > in your bunker. ;-) > > http://www.flickr.com/photos/staylortravelling/4056282884/ > > > > ------------------------------------------------------------------------------ > > Shaun Taylor > > http://shaundoreenevankeegan.blogspot.com/ > > http://shaunseye.blogspot.com/ > > > *From:* [email protected] [mailto:[email protected]] *On > Behalf Of *Benjamin McCafferty > *Sent:* 31 October 2009 11:03 > *To:* [email protected] > *Subject:* Re: Steam pressure very high > > Yeah, I was thinking of full bunker gear for pulling shots. Picture to > follow... > bmc > On Oct 31, 2009, at 9:59 AM, Shaun Taylor wrote: > > > Maybe setup a blast shield? ;-) > > > ------------------------------------------------------------------------------ > > Shaun Taylor > > http://shaundoreenevankeegan.blogspot.com/ > > http://shaunseye.blogspot.com/ > > > *From:* [email protected] [mailto:[email protected]] *On > Behalf Of *Benjamin McCafferty > *Sent:* 31 October 2009 10:47 > *To:* [email protected] > *Subject:* Re: Steam pressure very high > > I have never changed the pressure stat, so it's about 2 1/2 years old. I > am due for descaling, but not overdue. > tx, > bmc > On Oct 31, 2009, at 9:40 AM, Barry Luterman wrote: > > > > Sounds like the P-stat is going . Keep your eye on it. When was the last > time you changed it?Could also be some hard water deposit clogging a valve. > When was the last time you descaled? > On Sat, Oct 31, 2009 at 6:36 AM, Benjamin McCafferty <[email protected]> > wrote: > > > Good morning, happy Halloween! > > Rambled downstairs this morning, and was preparing to pull a shot. My > steam pressure is normally at 1.45 bar. I glanced down as I was about > to purge the steam wand, and pressure was at 2 bar or a little above. > I purged, and it stayed at 1.7 with the boiler light "on". > > After steaming milk, the pressure had dropped down to 1.2 or so (as > normal), and recovered/shut off at 1.45. Since then all is normal. > > Is something about to let go? Do I need to worry about imminent steam > burns, ha ha? > > Thanks all, > bmc > > > > > > > > > > > > > > > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
