Hi I recently upgraded a Brewtus II Vibe pump with a rotary pump upgrade kit, a very strange things keeps on happening and I am not sure what is causing it so I thought I would pose the question to the user group and see if anyone has any bright ideas.
Brewtus II Rotary pump upgrade not connected to mains water yet, just piped into a jug Can pull a shot fine but when finished and the machine is standing, the group head pressure gauge starts rising and goes all the way up to 12 Bar. Water also starts dripping from the OPV valve into the drip tray If I move the handle to the middle position, it does vent of excess pressure so there is pressure there and the gauge moves back to +-1bar Boiler temp is set for 91c Any ideas what could be causing the pressure rise in the machine? Regards JohnB -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
