John, Since my rotary upgrade, my machine does the same thing. I noticed it drips when the brew boiler heating element goes on and stops when it turns off. I never really worried about it too much. I assumed the excess water in the previous configuration was was simply feed back via the de aerator hose.
Rob Combs On Feb 10, 12:21 pm, John Brinkman <[email protected]> wrote: > Hi > > I recently upgraded a Brewtus II Vibe pump with a rotary pump upgrade > kit, a very strange things keeps on happening and I am not sure what > is causing it so I thought I would pose the question to the user group > and see if anyone has any bright ideas. > > Brewtus II > Rotary pump upgrade > not connected to mains water yet, just piped into a jug > > Can pull a shot fine but when finished and the machine is standing, > the group head pressure gauge starts rising and goes all the way up to > 12 Bar. > Water also starts dripping from the OPV valve into the drip tray > If I move the handle to the middle position, it does vent of excess > pressure so there is pressure there and the gauge moves back to +-1bar > Boiler temp is set for 91c > > Any ideas what could be causing the pressure rise in the machine? > > Regards > > JohnB -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
