You are going to have to open it up. It is probably the plastic tube that has a loop in it coming from the top of the boiler. Often it touches the top of the boiler and melts. It sometimes can be cut and shortened. It can be replaced at a nominal cost.
On Wed, Sep 22, 2010 at 9:17 PM, Richard W <[email protected]> wrote: > My Brewtus II may have a small leak someplace. > > In the last few weeks I seem to have to refill the water container > every day. > Previously, I would refill it every 2nd or 3rd day. > I can see small drops of water around the edges of the bottom of the > machine. No obvious leaks, but there is visible moisture. > > I have my Brewtus II on a timer. It goes on at 7 AM and goes off at 3 > PM. > Usage is roughly 3 double espressos & 1 cappuccino / day. > Does it seem that refilling every day indicates that there is a leak > somewhere? > > I have not opened it up yet. It is a real pain to open. > > I am hoping that, before I open it, someone may have some hints on > what to look for and the best procedure to fix any problem > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/brewtus?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
