Same post mentioned below I describe the process. I'll try to find it in a second and link to it. Easiest way is to heat the machine, then pry firmly against the side of the screen housing (about halfway up, denting/destroying the screen) and it will take the gasket out with it. Replace both.
bmc On Mar 15, 2011, at 5:42 PM, hauschildt wrote: > jumping in here with a question -- how do you remove that screen? > there's no screw or anything... > > > On Mar 14, 7:39 pm, dustin <[email protected]> wrote: >> If you pull out the screen that sits above the portafilter there is a >> seal there (large black plastic ring) It wears about every year or two >> for me after which water leaks from the group head. Just replacing >> this seal usually does the trick. You can order it from WLL. It's a >> common issue and they will know what you're asking for. Have you >> replaced this seal already? >> >> Best, >> Dustin >> >> On Mar 14, 9:25 am, David Jacobs <[email protected]> wrote:> It's been a few >> years with my Brewtus, and the leaking out of the brew >>> head is adversely affecting our coffee. I am thinking of just >>> disassembling the e61 and replacing the springs & seals that are worn. >>> Does that make sense to people? Am I missing something obvious? >> >>> Todd, Do you guys sell >>> this:http://www.bellabarista.co.uk/proddetail.asp?prod=expobar? >> >>> -- >>> [email protected] >>> (646) 244 9910http://hello.typepad.com > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/brewtus?hl=en. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
