I've seen others complain of similar problems, and so I believe I probably need an new OPV value, but before I order that...
I've had my Brewtus II about 3 years. Recently, I found that not too long into extraction, the pressure just drops, fairly quickly. And I mean it drops say to 4 bar - this is not a grind problem or what not. Sometimes it'll ramp back up, but most of the time not. I've tried slightly (turned from maybe 12 o'clock to 1 o'clock position) tightening/increasing the pressure (with the screw behind the drip tray), but to no avail. Anything else I can try? I have no problem replacing parts, etc. if that's the best way to go. If so, should i order it from Whole Latte Love, or? Anything else folks suggest once I open up the machine? -- Chris Bailey [email protected] @chrisrbailey -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
