Thanks, that's perfect.
One other question. The insulation is getting a little ratty and out of control. I'm thinking of wrapping it with a bit of that foil stuff you see on hot water pipe insulation and changing the straps to metal ones. Any reason not to do that (I mean heat-wise, is the boiler to hot for that foil sheet). On Jun 19, 1:48 pm, Ira <[email protected]> wrote: > At 11:18 AM 6/19/2011, you wrote:Putting BII back together after replacing > the pump. Does it matter which lines go where from the water feed. I know > one line splits into two, and one half goes to the inlet of the pump. Does > the other side of the Y go to the de-air, or the OPV. I'm thinking the > deair, but wanted to check. > There are schematics in here:http://www.roasterthing.com/downloads/brewtus.zip -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
