there are several o rings etc in the group that could cause a leak. todd @ wll could probably tell you what parts you need and whether or not he has them in stock. I know that some of the part numbers have changed depending on when yours was built. is it drippin down into the drain pan out of the group? there could also be wear and tear in the parts connected to the brew handle. I had to replace a couple of parts in there.h
>________________________________ > From: "[email protected]" <[email protected]> >To: Brewtus <[email protected]> >Sent: Saturday, February 25, 2012 7:28 PM >Subject: Re: Houston We Have a Problem(s): Manometer, Group Head Leak, & >Hissing > >Thanks for the reply. The group gasket & shower screen are new (a >couple months old or so). I'll clean a/o replace the vacuum breaker, >but the group gasket does not seem to be the problem (that's not where >it's leaking from at any rate). > >-Cheers > >On Feb 25, 6:14 pm, [email protected] wrote: >> How's the gasket under the portafilter? It it hasn't been replaced I'd do >> that first. You will probably have to clean or replace the vacuum breaker >> again as well. >> Sent from my U.S. Cellular BlackBerry® smartphone > >-- >You received this message because you are subscribed to the Google Groups >"Brewtus" group. >To post to this group, send email to [email protected]. >To unsubscribe from this group, send email to >[email protected]. >For more options, visit this group at >http://groups.google.com/group/brewtus?hl=en. > > > > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
