Thanks Dennis. Yes, I was thinking about putting in a liquid filled gauge as well; I would imagine the vibe pump causes some vibrations in the needle.
Good idea for sources. Unfortunately, the 2.5mm OD tubing is an odd size. McMaster Carr does have some 1/8" (3.1mm) compression fittings; I am just not sure of the ability of a compression fitting to fill that much space. Shipping is a killer for a gamble. Maybe someone has had some experience with it that can share. Solder joints may be a better option for filling the gap, but I couldn't readily find them. McMaster Carr takes a little time to navigate. On Tuesday, August 14, 2012 4:12:31 PM UTC-4, Dennis Keating wrote: > > mine has no brew pressure gauge so i am plumbed in and i added one to my > inlet feed line after my check valve but inside the pressurized system > part. i used a nice larger dial gauge liquid filled, too. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To view this discussion on the web visit https://groups.google.com/d/msg/brewtus/-/R1g9hfjD2ZoJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
