Mark: It is true that the new gasket is thicker than the old, dried out
one. And it is true that the portafilter handle is "seating" earlier
than the old one. These are not unexpected. But this seems much
different from when the machine was new. It feels like the wings are
barely moving into the slots (although the portafilter feels solidly in
place and does not wiggle.) And, after two+ weeks of use, the situation
hasn't improved.
Ben: No problem. I didn't take any offense at all to what you wrote. I
deal with "bug reports" all the time and realize how important it is to
get the description of the problem clearly stated.
Thanks everyone for your help. I have a call with the service department
this afternoon and we'll see what comes from it. I'll post an update
when there is something useful to report.
Peter
On 13-06-03 8:42 AM, Benjamin McCafferty wrote:
Hey Peter,
Wasn't trying to bust your chops. Each time I read "basket" in your
original, I was picturing the part that holds coffee. I just wanted to
clarify that I now understand what you meant and that hopefully my
response made sense too. No offense intended.
best,
bmc
Sent from my apple IIe
On Jun 3, 2013, at 8:13, Mark Carter-Piff <[email protected]
<mailto:[email protected]>> wrote:
It sounds like the new gasket is thicker than the old one (which
would make sense) and that the portafilter handle is "seating"
earlier than the old one. Which would also make sense.
Have I got it correct?
On Sun, Jun 2, 2013 at 6:22 PM, <[email protected]
<mailto:[email protected]>> wrote:
Today's Topic Summary
Group: http://groups.google.com/group/brewtus/topics
* Trouble fitting replacement gasket
<#13f07a10891fa954_group_thread_0> [1 Update]
Trouble fitting replacement gasket
<http://groups.google.com/group/brewtus/t/8794fcfd23d0b634>
Peter Sharpe <[email protected] <mailto:[email protected]>> Jun
01 04:00PM -0700
Sorry about the confusion. I think of the screen as just,
well, the
screen itself not what it is attached to. But let me restate
things with
the proper terminology.
The screen is a bit loose when there is no gasket. That is, I
can fully
insert the screen and then slide it back and forth. Not too
far, but
there is slack there.
The gasket was inserted with beveled side up.
That gasket and screen were installed about 2 weeks ago and I
lived with
the handle at 7:30 to see if it would gradually seat fully
but I didn't
notice any change after that time.
I used a portafilter without basket to push the gasket up as
far as I
could. Then I added the basket to the portafilter and pushed
again with
it. (When I say "push" I mean that I inserted the portafilter
and
rotated it with the wings in their slots.
The previous time that I inserted this new gasket and screen
I applied
plenty of force with all kinds of blunt instruments but
nothing would
make it budge.
The machine works and does not leak. I was hoping for
something closer
to 6 o'clock though.
Thanks for your reply.
Peter
On 13-06-01 1:38 PM, Ben McCafferty wrote:
You received this message because you are subscribed to the
Google Group brewtus.
You can post via email <mailto:[email protected]>.
To unsubscribe from this group, send
<mailto:[email protected]> an empty message.
For more options, visit
<http://groups.google.com/group/brewtus/topics> this group.
--
You received this message because you are subscribed to the
Google Groups "Brewtus" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected]
<mailto:brewtus%[email protected]>.
To post to this group, send email to [email protected]
<mailto:[email protected]>.
Visit this group at http://groups.google.com/group/brewtus?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google
Groups "Brewtus" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected]
<mailto:[email protected]>.
To post to this group, send email to [email protected]
<mailto:[email protected]>.
Visit this group at http://groups.google.com/group/brewtus?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google
Groups "Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/brewtus?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google Groups
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/brewtus?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.
