I think our Brewtus 1's are aging. I have experienced identical problems with my machine. Does your machine get real quiet when you backflush? I always worry that machine is building pressure and is going to explode. Respond back if you ever fixed this problem, as I am about to purchase a new machine.
On Wednesday, May 8, 2013 4:23:26 PM UTC-4, Fred wrote: > Hi Everybody, > > Me again with a little problem. After a pull a shot and them backflush the > machine very little water came out of the drain (bottom part of the group > head). Same problem when I clean it with a blind filter. Around one moth > ago, I took apart the 2 tubes of the drain and clean the valves (infusion > and discharge), and it start working again.It was working for awhile but I > am having the same problem again, but this time doesn't work even cleaning > the valves. My question is, should I just replace just the valves or maybe > it's a completely different problem? If this is the problem, where can I > get the valves? I read somewhere that no all the E-61 group head valves > have the same size. My espresso machine is a Brewtus I. Thanks in advance > for your attention at this matter. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/groups/opt_out.
