I have mine maxing at 1.3 without any issues, I think the pressure relief works at 1.4 bar or thereabouts. I personally would not worry about it running at 1Bar :-)
John - Johannesburg On Sun, Oct 20, 2013 at 3:11 PM, winnipegger65 <bewi...@shaw.ca> wrote: > Hello and thanks. >> > > John, you asked why I would want to lower the steam pressure below 1 bar. > I was told by my dealer that the recommended steam pressure should be just > below one bar when the machine is in 'steady state'. I see now, after > getting it back from repairs, that it is slightly above a bar or almost > exactly 1 bar. > > What's the thought here? I don't want to pop the pressure relief valve. > > > Bruce in Winnipeg > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to brewtus+unsubscr...@googlegroups.com. > To post to this group, send email to brewtus@googlegroups.com. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To post to this group, send email to brewtus@googlegroups.com. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/groups/opt_out.
