Thanks, I will try those things. I already set my new pressurestat to 1.3... but I'll give it a try. Probe connection looks clean so far. I might have to repalce the temp probe...
Benoit Le dimanche 22 février 2015 23:58:04 UTC-5, qbutcher a écrit : > > Very likely you need to adjust the pressurestat. I had the same problem > with a Brewtus III-R after I adjusted the pressurestat. I had ordered a > replacement pressurestat but before putting the new one in I adjusted the > old one and the problem went away. Has been going strong a couple years > since the adjustment. The other thing I would check is for corrosion on the > temperature probe connection on the pid. I noticed that water would spit > on the connection from the vacuum breaker on the top of the steam boiler I > cleaned it without replacing the o-ring). > > -Jeff -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
