I would be interested to see what you did as I want to do the same thing to mine. Thank you. Skip
On Fri, May 22, 2015 at 10:50 AM, Ryan Robold <[email protected]> wrote: > I recently purchased an older brewtus double boiler machine that did not > have the option to turn off the steam boiler. > > Since I only make an occasional milk drink I wanted to see if it was > possible to add on that feature. > > I found that its pretty easy modification that just requires a switch and > swapping a few wires around. > > I have the older ako temp control but it will work just as well with the > gicar pid. > > The only issue I could see this causing would be slightly less stable > boiler temps if pulling a lot of shots in a row since you don't have the HX > preheating the water before it enters the brew boiler. I did not have more > than 1 degree of fluctuation between shots on my machine with the steam > boiler off. > > If anyone is interested I can put up the instructions on how I did it. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
