Hey James, Congrats and I hope the machine works out great for you. I have just installed my second Jaeger p-stat, have not done the Sirai. Curious how it goes, but the Jaeger has been a good unit and lasted about 4-5 years after the original failed.
I just had my E61 completely disassembled and did not need to replace anything, except I have once replaced the shaft seals on the lever. My machine is a B2, so older than yours. I would check with Chris Coffee, and espressoparts.com, as a couple of possible sources. But you may not need them. One thing I noticed was that all the seals were kind of ragged around the edges, but very smooth and functional on the mating surfaces, i.e. they looked bad but work great still. All the best. bmc Sent from my apple IIe > On Jul 30, 2015, at 20:23, James Roybal <[email protected]> wrote: > > Hey guys just saying hello, I have just acquired my first Expobar machine, a > Brewtus III-R. It is 7 years old according to the previous owner and looks to > be fairly heavily used/abused. I have fully disassembled the machine and am > currently descaling all parts. > > A couple questions. > > - I would like to replace the P-stat with a Sirai for longevity. Has anyone > done this mod yet? > - Has anyone fully rebuilt the E61 and what's the best way to get the correct > replacement parts? > > Thanks in advance for your help. > -James > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
