Meant to say, "Found the thread on joystick assemblies and installation".
Sent from my apple IIe > On Aug 12, 2015, at 07:11, Benjamin McCafferty <[email protected]> wrote: > > Found It links to the one at Chris' Coffee, but not the Reneka one originally > mentioned. > I can't seem to copy the link to the thread, but if you go to the Brewtus > Google group and search "joystick" it will be the first hit. > best, > bmc > > Sent from my apple IIe > >> On Aug 11, 2015, at 23:00, James Roybal <[email protected]> wrote: >> >> I'm thinking about the joystick wands. Does anyone have the part numbers? >> Maybe not though since I never steam milk... >> >> I'm not interested in how everything works cause this is the 5th machine >> I've done, lol. >> >> The over pressure is actually new. It was recently replaced by the previous >> owner. Since I have an extra vacuum valve it will just be replacement if it >> needs it. >> >>> On Tuesday, August 11, 2015 at 3:25:38 PM UTC-6, bmacpiper wrote: >>> Nice, getting the lever type wands? I keep thinking I should do >>> that...maybe next time. >>> >>> On the vacuum valve--there is an o-ring that can get crusty, usually cleans >>> up really easily and the mating surface as well. Otherwise just the o-ring >>> is all you need. They're about 5 cents, look in the archives for my post >>> on the part number. >>> >>> The over pressure has a teflon seal and I just would check its mating >>> surface also. >>> >>> And hey, might as well see how it all works, right? After all, you didn't >>> come this far because you're not interested... :) >>> >>> I did find some good schematics of the e61 group, fortunately, after I took >>> mine apart without noting how it came apart. There are various types of >>> shafts, i.e. triangular, etc. that make it pretty easy. Such a simple >>> genius of a system... >>> >>> On the auto-refill circuit, this really is important I think. The >>> electromagnet fits around a tube, inside that tube is a plunger that snaps >>> back and forth. That plunger was covered with scale/stone in my case, very >>> fine layer, and it was sticking. I think this ultimately led to some of my >>> other problems. Instead of soaking, I used the back of a blade (carefully) >>> and scraped off the stone until smooth. There's also a rubber seal in >>> there to check, and a small triple orifice. >>> >>> Too much fun! >>> >>> bmc >>> >>> Sent from my apple IIe >>> >>> > On Aug 11, 2015, at 10:01, James Roybal <[email protected]> wrote: >>> > >>> > Nice catch on the group lol. I'm considering replacing both wands but >>> > I've already checked the hot water wand. Clean as can be. The group I'm >>> > just waiting for parts. As far as I know you don't descale safety valves >>> > or vacuum valves. I have a new vacuum valve waiting if it needs it. >>> > >>> > -- >>> > You received this message because you are subscribed to the Google Groups >>> > "Brewtus" group. >>> > To unsubscribe from this group and stop receiving emails from it, send an >>> > email to [email protected]. >>> > To post to this group, send email to [email protected]. >>> > Visit this group at http://groups.google.com/group/brewtus. >>> > For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
