Yes Mike--that photo is the end that would normally be outside the machine--I just have it tucked inside. In the closeup photo, the very top nut (silver in color) is the "external" or "distal" end of the stainless hose. Looking at my own photo, I am relatively certain there is no teflon tape on that joint. I believe the stainless line should have a black rubber gasket inside the nut, as would be typical for this type of water line i.e. for a toilet or sink. I already closed the case, sorry, but if you need me to pull it apart again I can.
Also, I'm pretty certain that all the mess in between the stainless and the ice maker/water line was included from WLL--but I'd just take the stainless line and your water line to the hardware store and find a solution that fits. best, Ben Sent from my apple IIe > On Dec 4, 2015, at 09:13, Mike St.George <[email protected]> wrote: > > Thanks for the info bmac, > > Actually I'm just talking about the other end of the stainless hose that > dangles out of the machine. At first I thought it was a regular hose > connection but it's not it's rounded inside without any kind of gasket so I > am confused. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
