No worries I did get my answer from Ira, first. :) Thanks Ira, that worked out great. I actually ended up going to a local home depot with the metal tube form the brewtus and an employee was able to find all the different adapters and T connectors that I will need to hook it up to the standard water line here in Canada. Ended up with few more connectors than at first seemed necessary in my mind but worked fine at the end. I can post pictures of the setup (if anyone finds it useful) but wouldn't be able to name all the adapters I ended up using :)
The water in my area is almost too soft so I did not need any additional filter/softener. I'm now looking into pressure regulators... On Friday, December 4, 2015 at 6:53:16 AM UTC-8, Mike St.George wrote: > > Hey Orde. > > Sorry to hijack a little but I'm plumbing in my brewtus right now. I'm > wondering what your final connection is at the end of the braided stainless > steel hose. I have what looks like a normal 3/8" female hose end but theres > a round brass end inside like it should be a flare connection or something. > What did you use a flare or should there be a gasket or something? > > Thanks > > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
