why shotgun all these parts? how old is the pump? don't shotgun parts. On Tue, Jun 7, 2016 at 12:13 PM, BklynJim <[email protected]> wrote:
> Hey guys, > I was having a problem with unstable brew pressure and I'm in the process > of replacing the pump, opv and deaerator. When I turn the machine on, even > before I reach brew temperature, water starts running out of the OPV line. > The brew pressure takes a very long time to reach pressure during a shot or > with the backflush disk and the pressures is erratic (I adjust it to 10 bar > and it works (slowly) for a bit and then may overshoot to 16 bar). The > water flow is also erratic often pumping no water for a few seconds and > then pumping slower than normal. > > I talked with WLL tech support and they suggested looking at the solenoid > valve - which checked out fine and looks fine on inspection. They now > suggest it could be the OPV. I may try the old OPV and see if that helps. > Any other ideas? > Thanks guys! > > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
