I took a paperclip and pushed down in the hole to reset mine. I'd wear rubber gloves though or it might shock you. There are several things it could be but that switch is the first place I'd look. If you have power going in and not out that's your point of failure.
On Sat, Jun 11, 2016 at 2:59 PM, <[email protected]> wrote: > Hi all, > > I purchased my Expobar Brewtus II as a refurb from Whole Latte Love in > 2009. Living on the Oregon coast far from any repair facilities, I've had > to learn to take care of repairs/replacement parts myself — pumps, relief > valves, pressurestats. I'm not naturally a mechanical wiz, but I've managed > somehow, and my Brewtus has served me well for seven years. > > I got up this morning, turned on the Brewtus, and came back half an hour > later to make my morning big gulp triple cappuccino. Started pulling my > shot — fine — and went to steam my milk/butter/coconut oil concoction (for > Bulletproof Coffee). Nothing. No steam pressure. > > Initially, I thought that perhaps the steam nozzle might be plugged, but > no. Glanced up to see the steam gauge at ZERO. > > It's Saturday (of course — nothing ever breaks during the week, only on > weekends), so I can't get help from WLL. Thought I'd check here first. > > For troubleshooting purposes, everything works but the steam boiler — > water heats up, pump operates, brew boiler pulls a shot at 9.5 bars. Only > the steam boiler is dead. > > Does that indicate a PressureStat failure? I replaced the original > pressurestat in 2012 with a heavier-duty Jaeger PressureStat. I was hoping > it would last forever, and I've had no trouble with it for four years. My > Brewtus has been fine all year right up through yesterday, so this is a > sudden and complete sudden failure of something. Is the pressurestat the > most likely culprit? > > I wondered if perhaps the high-limit switch had tripped, so I looked for > it on both boilers. Curiously, the tiny red reset button on both switches > has sunk into the housing, so there's just a nipple with hole in the switch > on each boiler. Is that OK? > > Any help would be much appreciated. Thanks. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
