hey guys, like the subject says, this morning I turned it on and an hour later I found it showing 270F. (was set @ 199F) reading was real, when pulling down on the lever steam would come out of the group head. Anyways, I turned it off then turned it back on, then it never reached nominal again. After it cooled down I opened it and it looks like only the steam boiler is heating up. Unfortunately my multimeter is dead (I can only measure resistance not voltage) and I could only measure that both heating elements have the same resistance (about 14 or 16 ohms) so they're prob. both ok. I ordered another multimeter and when I get it I'll try to follow the measurement tips from the WLL video <https://www.youtube.com/watch?v=UIiLeRdVWAU> unless somebody saw this happening before and can point me what the problem was in their case ;)
-- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
