Yeah I was thinking about a new machine but it just doesn't make sense with everything working great. I scratched that itch with the new valves. UPS delivered them at 12:49 and I had them installed at 2:15. I had to go to my office and pick them up, and wait for it to cool down some, or it would have been even faster. If you follow the directions in Tomas' post you won't have any problems at all. Really easy mod.
Herman On Mon, Aug 22, 2016 at 11:21 AM, Benjamin McCafferty <[email protected]> wrote: > Sweet Herman! I’m due for a steam wand seal replacement, maybe I’ll have > to give it a shot also. :) > > With my recent weird pump behavior, I also have the itch to buy a new > machine perhaps. But I doubt it. I’m always a sucker to fix and keep going > with what I’ve got… > > b > > On Aug 22, 2016, at 08:08, herman dickens <[email protected]> wrote: > > Just wanted to say thanks for the write up. I purchased the items in your > list and finished the install in less than an hour. Looks much better to > me! I removed the steam wand, with the foam knife, from my old valve and > installed it in the new one with no problems and all is working well. > Thanks again. > > Herman > > On Wed, Jul 27, 2016 at 11:32 PM, Tomas <[email protected]> wrote: > >> I did this a month ago and it's great! I had some leaking as well and >> got it fixed by using Teflon tape on all connections. >> >> >> >> >> >> On Saturday, July 23, 2016 at 9:20:29 PM UTC-4, winnipegger65 wrote: >> > There has been a few posts both on here and Home-Barista regarding the >> retrofit/upgrade of the knobs to joysticks. I thought I'd give that a try >> after my steam wand got kind of wonky. It still works but I used that as >> an excuse. I don't exactly have a natural talent for these kinds of >> retrofits but I can say it really is easy. If I can do it so can you. What >> you'll need is both the joystick wand, either steam or hot water, *and* the >> adapter kit. I think Chris calls it the 'Izzo' kit. You'll need that make >> everything work. >> > >> > The adapter kit comes with 3 parts. 1) an adapter which converts from >> the Brewtus thread type to the type on the steam wand. When remove the >> flair nut from the Brewtus steam wand, and try to put that on the joystick >> wand, it won't fit. You'll need to first screw on the adapter to the >> joystick steam wand and then the Brewtus flair nut will work great. You >> should also use the Teflon tape on the screw threads just to keep things >> from leaking. Also, before you even put flair nut back on, you should make >> sure the steam wand itself is nice and tight. I used a socket to get to the >> nut on the inside of the machine. I was lucky enough that the socket was >> deep enough to reach the nut past the threads of the steam wand. You'll >> need metric sizes. >> > >> > The second pard of the adapter kit is a little copper washer. I didn't >> use that because it wasn't needed to make everything fit. Of course once I >> turned on the machine it leaked. I guess that copper washer is needed after >> all. So, after unscrewing everything, retaping with teflon tape, I put the >> little copper washer between the pipe coming from the Brewtus and into the >> adapter on the steam wand. It really only fits in one way. I screwed it >> tight and was worried the flair nut would 'bottom out' before it got tight >> enough. It did seem to bottom out or at least get close to it but this >> time, when I turned on the machine and let it warm up, no leaks! Be safe >> and if you're messing around with the machine without the metal cover on >> it, wear safety glasses. If something blows and your face is in there >> looking for leaks it would be really bad. >> > >> > Finally, the third part of the adapter kit is some kind of washer, >> bigger than the copper washer. This time I really didn't need it and wasn't >> even sure what it's for. Maybe another brand of machine needed it. >> > >> > All in all, like people say, it is a very easy DYI upgrade and works >> very well. It looks like the Brewtus was made for it. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at https://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. >> > > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
