Hello winnipegger65, Monday, July 17, 2017, 5:43:09 AM, you wrote:
> Have you had difficulties re-installing the shower screen > when using a genuine Expobar E61 replacement gasket? I have. > No matter what, I cannot get it to seat. If I use a > replacement E61 gasket (non-Expobar) from a local espresso > repair shop, it works no problem at all. I wonder if the > Expobar gasket is just slightly thicker to make it difficult to seat. Gaskets come 8mm and 8.5mm thick and there are .1mm spacers you can put under them. Get the gasket that makes sense, I use the Cafelat silicon ones which seem to work fine and don't die from the heat. Adjust the gasket and shim thickness till the portafilter handle stops at a pleasant location. I would not be concerned in the least about who made the gaskets. -- Ira -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
