Hello Murray, Saturday, January 20, 2018, 10:24:43 AM, you wrote:
> When you did your rewire, how did you connect the three > individual wires at their common point? Did you use a bus bar, or a terminal > block? It's a commercial machine and has a big 3 phase relay, I just ran the extra wires from the other relay contacts and jumpered all the input sides together with short pieces of 14 ga wire, then one wire from each contact goes to one side of each heater. I don't remember where the other side comes from but it's also 3 wires. I think there is a big terminal block where the power comes in. Commercial machines are really different or at least this on is, all it has is a Gicar box to control the autofill solenoid and a pressurestat to operate the big relay, no pump or anything else to complicate the machine. -- Ira -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
