Good luck. I finally put all my stuff back to normal last night.
I had pulled the cover off yesterday, and between the fact that I didn't have the right wrenches to get in that tight space to adjust the rotary and that I don't trust that very old brew gauge anyway, I decided to skip adjusting the rotary and just assume it had been set accurately between the originator (WLL I believe) and the previous expert owner. Of course something happened, and the machine and water line would vibrate LOUDLY ever time I'd pull a shot unless I turned the water line PRV up to 30psi. After a bunch of messing around I found a spot on the braided metal portion of the line that looked like it had been kinked, I gave it a bit of a squeeze and took any sharp turns out of the excess lines, and all seems back to normal with the PRV set back down at 20psi. I'm hoping the machine will behave for a while since I'm about done with feeling like every time I touch the machine something else breaks :) On Saturday, August 4, 2018 at 9:08:36 PM UTC-4, herman dickens wrote: > > Thanks > > On Sat, Aug 4, 2018 at 9:05 PM 'Mike Walsh' via Brewtus < > [email protected] <javascript:>> wrote: > >> Mine has never stuck again (and I'm assuming that was why the safety >> blew), and Tim's at WLL was to hang loose, so I've left it alone for now. >> Crossing fingers that I'm good for a while more. If it does go, I'll >> probably bypass the pstat and just run the brew boiler, at least until I >> can get a new one. Good luck Herman. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To post to this group, send email to [email protected] >> <javascript:>. >> Visit this group at https://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. >> > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
