It's well worth putting in a pid to keep it going Herman
---------- Forwarded message --------- From: Rob K <[email protected]> Date: Mon, Aug 5, 2019 at 12:48 PM Subject: Re: B II Coming To: Brewtus <[email protected]> I'm assuming he was talking about the AKO controller being end of life and not the machine. I've been pulling great shots pretty much every day for three weeks with no issues on the temperature or pressure. I've been checking the water temp at the brew group by holding the temperature probe of my Klein multimeter in the flow directly at the dispersion screen and it is right where it needs to be. Who needs any fancy device for that! I'd also like to thank the cute little 26 y/o former barista who pushed me to get this fixed! I have a replacement temperature probe, probably deal with getting the old one out and new one installed over Labor day weekend. On Monday, August 5, 2019 at 7:50:30 AM UTC-5, StevieG. wrote: > > My BII is still going strong after 15 years. I have replaced some parts > over the years, but end of life? It still made an absolutely perfect > double shot this morning. Think I'll have another in a bit. > >> >>> -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/0d7600ff-edb2-4552-bb7a-b14282b9df6f%40googlegroups.com <https://groups.google.com/d/msgid/brewtus/0d7600ff-edb2-4552-bb7a-b14282b9df6f%40googlegroups.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/CAM9mha18vGektbdTwkSMEu7kLDRhEuSk_wE22P58CRQqSyYoZQ%40mail.gmail.com.
