I forgot to add, the spring measures ~19mm long by ~14mm diameter. Thanks again, Mario
> On Dec 28, 2020, at 22:32, Mario G <[email protected]> wrote: > > Hello Everyone, > > I purchased a used Brewtus III-R about 6 months ago and noticed signs of > excessive scale. I was encouraged by what I see some have done here in this > Google group, so I am in the middle of a full teardown for descaling and > maintenance. > > I was sure I had awesome documentation pictures and every diagram I could > ever need, but I am having some trouble while assembling the pump valving. I > cannot figure out where the spring circled in this picture belongs. Under the > inlet or outlet fitting? Inside the retention valve? > > Any help would be outstanding! > > Thanks, > Mario > -- > You received this message because you are subscribed to a topic in the Google > Groups "Brewtus" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/brewtus/gnEYutSekac/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/141897fa-d84c-4cb2-b742-d21d8300fc42n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/4291ABEA-A107-4918-AAEC-7DF32F8BE771%40gmail.com.
