I've gone a few years between descaling (I know...) and after doing it (with Dezcal) yesterday, my pump doesn't seem able to hold pressure. It's a Brewtus IV w/ vibration pump purchased from WLL made in 2015. It was working perfectly fine yesterday before the descale.
Here's a vid pulling a shot: https://photos.app.goo.gl/Bw46gnoAaTTJjNMP8 Here's a vid with a backflush blind insert: https://photos.app.goo.gl/F2VvWbcgnCvnSgXPA As you can see/hear, it'll get to 9-10 bar then the pump weakens/shuts down like it can't hold the pressure, then restart once it goes down to 4-5ish bar. I tried descaling 2 more times. Some brown sediment came out of the faucet during rinsing, but it's otherwise doing the same thing. Any suggestions? Thanks in advance. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/2e0e95eb-cad2-4457-ba7d-cf398e048500n%40googlegroups.com.
