Hi all, Our Expobar Brewtus IV (10 years old) has started having issues with flushing out the remaining water after each shot. The amount of water that comes out of the exhaust pipe (if that's the name?) is relatively small, and instead the puck is a wet mess.
We had the same issue a few years ago (after a while, no water was being flushed out, while the pressure remained in the portafilter attached to the group head), so took it for repair and a part had to be replaced (the price of that whole enterprise was 300 EUR). If possible, we'd like to fix it ourselves this time around. We already once opened the group head to clean it, so I was wondering if we could just replace some parts. In view of this, would any of you maybe know which part(s) could be malfunctioning (and if this is a relatively common problem, would it be worth it already ordering the relevant parts out of these <https://www.avola-coffeesystems.de/expobar/expobar-bruehgruppe-ex0201/8038732?#9> ?) In addition, water has recently started dripping from the group head when the pump is off, so I assume some seals need to be replaced anyway. Any help much appreciated. All the best, Dunja -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/181a0afb-204f-4169-ae28-96f0054b740dn%40googlegroups.com.
