Re: Brewtus tripping RCD after steam boiler filled

['Ben McCafferty' via Brewtus]

Oh! We’ll that changes things. In that case, I think you’re probably looking at the overheat sensor on top of the steam boiler. See if it isn't crusty and falling apart. Bypass it and see if it stops tripping the breaker.  b Sent from my iPhone On May 2, 2023, at 18:05, Todd Salzman <to...@wholelattelove.com> wrote:  You should be able to grab an ohm meter and check for continuity from the leads on the heating element to the copper boiler. On Tue, May 2, 2023 at 9:03 PM Sam Macaluso <smac...@gmail.com> wrote: Hey Ben, If I disconnect the steam boiler and leave everything else connected, it doesn't trip.  As soon as I connect the steam boiler, it trips. I'll check your posts and see if I can trace it down to something more specific by bypassing the pressurestat. Cheers Sam On Wednesday, May 3, 2023 at 10:48:26 AM UTC+10 Ben McCafferty wrote: Hey Sam— It’s been a minute, but I’m pretty sure that the brew boiler has priority if you’re on a US/120V system. So—the boilers get filled, and then the brew boiler fires until it’s hot, then the steam boiler fires until it’s hot.  If I had to guess, I’d say the brew boiler element is the culprit. Checking resistance may not help you, since it can be intermittent and may look fine when cold. Search my old posts on bypassing the pressurestat—that may help you for troubleshooting. You should be able to test by putting power to the brew boiler, and if it trips the breaker right away (or as it’s heating), you’ve found the culprit. Hope that helps, and I’ll be curious to hear what you find. Best, b On May 2, 2023, at 17:26, Sam Macaluso <sma...@gmail.com> wrote: Hi, My Brewtus Minore trips the RCD/Circuit breaker after the steam boiler is filled. I though it could of been the element so replaced it but it's still doing the same thing. I've checked everything else and they all seem ok. Any tips or ideas what could be causing this? Cheers Sam -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+u...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/3ce0a30a-8ff0-4757-869c-6f59baeb1e91n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/4e29d4d4-fc28-4f83-aa43-a9a9fd7297bcn%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/CA%2BX2q_q9tZy-X8m8PTnGBz_8ZuLXGfbHxC9kY3mnVvPNqt44%3DA%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/34AB5EB7-8A3C-40D1-ABFB-1D79764DF653%40me.com.