Hey all, hope all are good. Still lurking, though my B2 has been retired for quite a while now!
Hoping someone might have insight—the ECM is an E61 machine, largely similar to the Brewtus. It has a green light to indicate power (like the lighted switch on the Brewtus), and a separate orange light when heating. It also indicates heating with a pulsing dot on the control board/display. Like the Brewtus, it has two boilers and can run on a 110V circuit by prioritizing one at a time. The machine is on a timer, so normally kicks on early and is up to temp when I get up. The past two mornings, the machine has had a green light (i.e. it has power), but no orange light and the machine is cold. If I power-cycle, i.e. turn it off and back on with its own switch, it heats normally. Something is failing, just not sure what. For reference, the one time I’ve had a boiler element go bad, it would heat partially and then trip the GFI, much like the Brewtus would. So I don’t think it’s that. Maybe the PID controller going bad? Other thoughts? Thanks as ever, Ben -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/FDFB3CBD-692D-4D31-AF28-7D8BBC6DFE10%40me.com.
