Hello,
I have two vlan’s configured on my switch port i.e 246 & 247. 247 is a tagged
vlan and 246 is the untagged vlan(native vlan).When I create a virtual vlan
interface with tagged vlan 247 using vconfig(eth0.247) it works fine. If I
create a virtual vlan interface with untagged vlan 246 using vconfig(eth0.246)
I see a different behaviour.
My configuration
Ifconfig eth0 0.0.0.0 up
Vconfig add eth0 246
Ifconfig eth0.246 192.168.246.3 netmask 255.255.255.0 up
Route add default gw 192.168.246.1
The packet that goes out from the linux box is tagged with 246 vlan but the
replies are untagged(as it is the native vlan). So these untagged packets are
not accepted by linux box. So, can you suggest me a way in which I can
configure my linux box so that the untagged packets for default vlan are
accepted?Can bridging be done on eth0(untagged interface) and eth0.246(tagged
interface)?
Thanks,
Sunil
The INTERNET now has a personality. YOURS! See your Yahoo! Homepage.
http://in.yahoo.com/_______________________________________________
Bridge mailing list
[email protected]
https://lists.linux-foundation.org/mailman/listinfo/bridge
