When BROPT_FDB_LOCAL_VLAN_0 is enabled, the local FDB entries for the member ports as well as the bridge itself should not be created per-VLAN, but instead only on VLAN 0.
Thus when a VLAN is added for a port or the bridge itself, a local FDB entry with the corresponding address should not be added when in the VLAN-0 mode. Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Petr Machata <[email protected]> --- net/bridge/br_vlan.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index 939a3aa78d5c..ae911220cb3c 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -331,10 +331,12 @@ static int __vlan_add(struct net_bridge_vlan *v, u16 flags, /* Add the dev mac and count the vlan only if it's usable */ if (br_vlan_should_use(v)) { - err = br_fdb_add_local(br, p, dev->dev_addr, v->vid); - if (err) { - br_err(br, "failed insert local address into bridge forwarding table\n"); - goto out_filt; + if (!br_opt_get(br, BROPT_FDB_LOCAL_VLAN_0)) { + err = br_fdb_add_local(br, p, dev->dev_addr, v->vid); + if (err) { + br_err(br, "failed insert local address into bridge forwarding table\n"); + goto out_filt; + } } vg->num_vlans++; } -- 2.49.0
